Forespar SR-2 Jib Roller

The Forespar® SR-2 Jib Roller is an essential component for marine enthusiasts, designed to enhance the performance and longevity of your boat's jib system. Compatible with wire shrouds ranging from 3/16” to 3/8” in diameter, this jib roller ensures smooth sail adjustments and reliable operation in various marine conditions.

Compatible Wire Shroud Sizes

Select the appropriate insert liners to ensure a perfect fit for your wire shroud. Refer to the table below to determine the right insert liner for your wire diameter:

Wire Diameter	Insert Liner
3/8” wire	No insert required
5/16” wire	#1 inserts
9/32” wire	#2 inserts
¼” wire	#3 inserts
7/32” wire	#4 inserts
3/16” wire	#5 inserts

Installation Instructions

Installing the Forespar® SR-2 Jib Roller is straightforward when following these steps carefully:

Preparing the Jib Rollers

1. Decide on the placement of the jib rollers either above or below the spreader tips. Positioning them below the spreaders typically makes installation easier.
2. Pre-assemble the parts on deck to minimize the risk of losing components while working from the boatswain’s chair.
3. Keep a 3-inch piece of masking tape nearby and attach it to the shroud for temporary assembly assistance.

Assembling the Hub and Inserts

4. Select the appropriate inserts based on your wire shroud size.
5. Insert the liners into the two halves of a hub and position them around the shroud.
6. Use the masking tape to loosely secure the hub assembly, ensuring that the mating faces of the inserts are parallel with the hub faces.
7. Align the two clearance screw holes at one end of the hub with the corresponding smaller holes on the opposite hub half.
8. Insert the four supplied screws and tighten them just enough to allow the hub assembly to slide along the wire shroud. Remove the masking tape once secured.

Installing the Rollers

9. Attach the two halves of each jib roller together, ensuring that one half with clearance holes aligns with the half without clearance holes.
10. Secure the roller halves by tightening the screws completely.
11. Position the jib roller on the shroud at your desired location.
12. Fully tighten the four hub screws to ensure the hub interfaces are securely closed, providing a stable and smooth-operating jib roller.

Benefits of the SR-2 Jib Roller

• Durable Construction: Made with high-quality materials to withstand harsh marine environments.
• Smooth Operation: Ensures effortless sail adjustments, enhancing overall sailing performance.
• Easy Installation: Designed for straightforward installation, reducing setup time and effort.
• Versatile Compatibility: Compatible with a wide range of wire shroud sizes, making it suitable for various boat types.

Maintenance Tips

To ensure the longevity and optimal performance of your SR-2 Jib Roller:

• Regularly inspect the rollers and hubs for signs of wear or corrosion.
• Keep the moving parts lubricated to maintain smooth operation.
• Ensure all screws and fittings are tight to prevent any movement or loosening during use.

Upgrade your boat's jib system with the Forespar® SR-2 Jib Roller and experience enhanced sailing efficiency and reliability. Whether you're a seasoned sailor or a boating enthusiast, this jib roller is a valuable addition to your marine equipment arsenal.

Orders of physical products placed by 3 PM EST M-F typically ships the same day, if all requested items are in stock. Weekend orders will typically ship on Monday.

Shipping takes 2-7 days.

We currently ship to the Contiguous 48 States.

Life of Sailing merch is custom made for the customer after an order is placed. Total turnaround is typically 7-14 days from order to doorstep.